Can You Convert 1970 Honda Philips Head To Metric Head

Trendingworldtoday.com Dengan izin Allah semoga kita selalu diberkati. Di Tulisan Ini aku mau menjelaskan Trending yang banyak dicari orang. Deskripsi Konten Trending Can You Convert 1970 Honda Philips Head To Metric Head Pastikan Anda membaca hingga bagian penutup.

Converting 1970 Honda Philips Head to Metric HeadIntroductionHonda motorcycles have been a popular choice for riders for decades, and the 1970 models are no exception. However, these bikes were originally equipped with Philips head screws, which can be difficult to find and work with today. Fortunately, it is possible to convert these screws to metric head screws, which are more readily available and easier to use.Materials Needed Metric head screws (same size as Philips head screws) Screwdriver Drill TapInstructions1. Remove the Philips head screws. Use a screwdriver to remove all of the Philips head screws that you want to convert.2. Drill the holes. Use a drill to drill holes in the same location as the Philips head screws. The holes should be slightly smaller than the diameter of the metric head screws.3. Tap the holes. Use a tap to thread the holes. The tap should be the same size as the metric head screws.4. Install the metric head screws. Screw the metric head screws into the holes.Tips If you are not comfortable drilling and tapping holes, you can take your bike to a mechanic to have them do it for you. Be sure to use the correct size drill bit and tap. If the holes are too small, the screws will not fit. If the holes are too large, the screws will not be secure. Apply a small amount of thread locker to the screws before installing them. This will help to prevent them from coming loose.ConclusionConverting the Philips head screws on your 1970 Honda to metric head screws is a relatively simple process that can be completed in a few hours. By following these instructions, you can make your bike easier to maintain and repair.